| 电缆槽模具的工艺 |
| 添加时间：2019/8/14 15:12:31 浏览次数： |
| 电缆槽模具的工艺 Technology of Cable Channel Die 电缆槽模具不容易损坏,简单的水泥生产技术产品同时,直接的方式混凝土盒子,水泥干脱模后,成为水泥产品的佳生产工艺。电缆槽模具使用钢铁需求更少的杂质,细均匀,抛光时没有纤维取向,不应该出现点蚀或橙皮。电缆槽模具使用钢铁需求更少的杂质,细均匀,抛光时没有纤维取向,不应该出现点蚀或橙皮。第二个是切削加工需求。模具的过程中,需要有一个切割和钳工和更换的问题。使用寿命变长,提高切削性能和降低表面粗糙度和塑料模具钢材的硬度必须合适。后是表面硬度和耐磨性的要求。 Cable groove die is not easy to damage. Simple cement production technology products, at the same time, direct way concrete box, cement dry demoulding, become a good production process of cement products. Cable groove dies need less impurities and are fine and uniform. There is no fiber orientation in polishing, and pitting or orange peel should not occur. Cable groove dies need less impurities and are fine and uniform. There is no fiber orientation in polishing, and pitting or orange peel should not occur. The second is cutting demand. In the process of die cutting, there is a need for cutting and fitter and replacement. It is necessary to improve cutting performance and reduce surface roughness and hardness of plastic die steel with longer service life. After that is the requirement of surface hardness and wear resistance. |
| 上一页 护坡模具在选择的时候最好注意以下几点: |
| 下一页 塑料模具的工作条件 |