| 盖板模具制作 |
| 添加时间：2019/12/3 16:35:38 浏览次数： |
| 盖板模具制作 Die making of cover plate 盖板模具制作很简单，就是直接将混凝土到放入沟盖板模具中，通过振动平台震动，排除混凝土里的气泡，使得水泥制品更加有型与美观，同时盖板模具易脱模，不易变形，光亮度高。 The production of cover plate mold is very simple, that is, directly put the concrete into the trench cover plate mold, vibrate through the vibration platform, eliminate the bubbles in the concrete, so that the cement products are more stylish and beautiful, at the same time, the cover plate mold is easy to demould, not easy to deform, high brightness. 选材 Material selection 盖板模具的选材盖板模具采用聚丙烯(PP)为原料，其材料具有良好的可锻性、切削加工性、淬硬性及可磨削性等。盖板模具采用钣金钢为原料，其材料具有很好的可塑性、适硬性、加工型、超韧性等。 The material of the cover plate die is polypropylene (PP), which has good malleability, machinability, hardenability and grindability. The die of cover plate is made of sheet steel, which has good plasticity, adaptability, processing type and super toughness. 防老化的方法 Anti aging method 要想让模具使用的时间变长方法:一是避免盖板塑料模具受强光照射;二是避免腐烂变质的物品与盖板塑料模具集中存放;三是生产过程中对模具进行范围的控制;四是控制人为破坏，严格按照生产规定及生产要求进行合理的生产。 In order to prolong the use time of the mould, the following methods should be adopted: first, to avoid the strong light irradiation on the plastic mould of the cover plate; second, to avoid the centralized storage of rotten and deteriorated articles and the plastic mould of the cover plate; third, to control the scope of the mould in the production process; fourth, to control the man-made damage and carry out the reasonable production in strict accordance with the production regulations and production requirements. |
| 上一页 连锁护坡模具不同的生成原理 |
| 下一页 生态护坡模具砖的制作 |